Burny - Microspeed

Burny - Microspeed

Product Overview
Features
Literature

Microspeed drives have been designed as ultra compact modules, suitable for a wide
variety of industrial automation requirements. They are an ideal solution for incremental Motion control, velocity and torque loop contouring control, and positioning systems which require fast response, high torque at low speed, smooth speed control and high reliability. Drives can be configured to operate in torque mode, or a variety of velocity modes with tachogenerator, armature or encoder feedback.

The Microspeed drive range operates from 20 to 130Vdc, and drive DC Brushed
servomotors of up to 1100W.

The Microspeed plus range operate from 20 to 270Vdc, and drive DC Brushed
servomotors of up to 4000W.

Standard Features

Ultra Compact Design
Good cost to performance ratio
Easily personalized
Simple to install and use
Operating frequency: 22Khz
Surface Mount Technology
Motor torque ranges from 0.1 to 11Nm
Single DC Power supply
Panel mount
Torque / current loop mode option
Velocity feedback modes include Tachogenerator, Armature and Encoder
Fully protected against external short circuit, over-under voltage, and over temperature
Microspeed plus has positive and negative limit switch inputs

Options

Encoder Feedback
PWM + Dir mode

Adjustments

Dynamic Gain KV/DER
Ramp time adjustment
Offset adjustment
Personality header sets preamp and current loop gains, continuous and peak currents,
and acc/dec times
Solder bridges set operating mode

Specifications

Supply voltage range:	(MCS 60) 20 to 82VDC (MCS 110) 35 to 130VDC (MCS Plus 60) 20 to 82VDC (MCS Plus 140) 40 to 182VDC (MCS Plus 200) 55 to 275VDC
Operating frequency	22KHz
Operating temperature	0 - 40°C (32°-104°F)
Diff. Analog input reference	±10V
Motor current monitor	±7.5V (Peak current)
Auxiliary output supply for encoder	+5V/+12V@130mA
Enable Signals	+10 to 30VDC
Output voltage supply	+10/-10V@4mA