Microspeed

 

 

Microspeed drives have been designed as ultra compact modules, suitable for a wide variety of industrial automation requirements. They are an ideal solution for incremental Motion control, velocity and torque loop contouring control, and positioning systems which require fast response, high torque at low speed, smooth speed control and high reliability. Drives can be configured to operate in torque mode, or a variety of velocity modes with tachogenerator, armature or encoder feedback.

The Microspeed drive range operates from 20 to 130Vdc, and drive DC Brushed servomotors of up to 1100W.

The Microspeed plus range operate from 20 to 270Vdc, and drive DC Brushed servomotors of up to 4000W.

Microspeed Plus Specifications

Microspeed

Standard Features

  • Ultra Compact Design
  • Good cost to performance ratio
  • Easily personalized
  • Simple to install and use
  • Operating frequency: 22Khz
  • Surface Mount Technology
  • Motor torque ranges from 0.1 to 11Nm
  • Single DC Power supply
  • Panel mount
  • Torque / current loop mode option
  • Velocity feedback modes include Tachogenerator, Armature and Encoder
  • Fully protected against external short circuit, over-under voltage, and over temperature
  • Microspeed plus has positive and negative limit switch inputs

 

Options

  • Encoder Feedback
  • PWM + Dir mode

 

Adjustments

  • Dynamic Gain KV/DER
  • Ramp time adjustment
  • Offset adjustment
  • Personality header sets preamp and current loop gains, continuous and peak currents, and acc/dec times
  • Solder bridges set operating mode


Specifications

Supply voltage range: (MCS 60) 20 to 82VDC
(MCS 110) 35 to 130VDC
(MCS Plus 60) 20 to 82VDC
(MCS Plus 140) 40 to 182VDC
(MCS Plus 200) 55 to 275VDC
Operating frequency 22KHz
Operating temperature 0 - 40°C (32°-104°F)
Diff. Analog input reference ±10V
Motor current monitor ±7.5V (Peak current)
Auxiliary output supply for encoder +5V/+12V@130mA
Enable Signals +10 to 30VDC
Output voltage supply +10/-10V@4mA

 

 Technical Specification of the Microspeed

Model MCS60
1/2
MCS60
2.5/5
MCS60
6/12
MCS60
10/20
MCS110
1/2
MCS110
2.5/5
MCS110
6/12
Nominal current 1 A 2.5 A 6 A 10 A 1 A 2.5 A 6 A
Peak Current 2 A 5 A 12 A 20 A 2 A 5 A 12 A
DC Power Supply
MIN/MAX
MCS60   20-80 Vdc (63*)

 

Technical Specification of the Microspeed Plus

Model MCS60 Plus
SIZE (A) 14/28 20/40
Nominal Current 14A 20A
Peak Current 28A 40A
DC Bus 63

 

Model

MCS140 Plus

SIZE (A) 1/2 2.5/5 6/12 10/20 14/28 20/40
Nominal Current 1A 2.5A 6A 10A 14A 20A
Peak Current 2A 5A 12A 20A 28A 40A
DC Bus 140

 

Model

MCS200 Plus

SIZE (A) 1/2 2.5/5 6/12 10/20 14/28 20/40
Nominal Current 1A 2.5A 6A 10A 14A 20A
Peak Current 2A 5A 12A 20A 28A 40A
DC Bus 200