Minispeed

 

 

The Minispeed Servo drives are ideal for incremental motion control, high precision velocity and torque loop contouring applications and positioning systems which require fast response, high torque at low speed, precise speed control and high reliability.

The Minispeed comes in a standard eurocard size, to fit either a rack or motherboard.
The drive is designed to operate from 20 to 275Vdc.

Minispeed Specifications

Minispeed

Standard Features

  • Small dimensions Eurocard Size
  • High Industrialisation
  • No Noise 20Khz
  • Surface Mount Technology
  • Motor driving range from 1 Nm to 8 Nm
  • Unbeatable multi axis executions
  • IGBT or power MOSFET bridge
  • Differential speed reference ±10V
  • Single DC Power supply
  • Operating temperature 0-40°C
  • Torque mode
  • Velocity mode feedback from Tachogenerator, Armature, or Encoder
  • Fully protected against external short circuit, over-under voltage, over temperature, and loss of tacho signal

 

Adjustments

  • Dynamic Gain (KV)
  • Derivative (DER)
  • Acc Dec Adjustable (Acc)
  • Input balance (BIL)
  • Fine speed (VEL)
  • Ramp time adjustment
  • Offset adjustment
  • Removable Personality module sets preamp and current loop gains, continuous and peak currents, and acc/dec times

Specifications

Model MS60
4/8
MS60
8/16
MS60
10/20
MS60
14/28
MS60
20/40
MS60
25/50
Continuous Current 4A 8A 10A 14A 20A 25A
Peak Current 8A 16A 20A 28A 40A 50A
Blower Cooling       * * *
DC Power supply 22-85 (63)
Output Voltage 95% VCC Supply

 

Model MS140
4/8
MS140
8/16
MS140
10/20
MS140
14/28
MS140
20/40
MS140
25/50
Continuous Current 4A 8A 10A 14A 20A 25A
Peak Current 8A 16A 20A 28A 40A 50A
Blower Cooling       * * *
DC Power supply 40-185 (135)
Output Voltage 95% VCC Supply

 

Model MS200
4/8
MS200
8/16
MS200
10/20
MS200
14/28
MS200
20/40
MS200
25/50
Continuous Current 4A 8A 10A 14A 20A 25A
Peak Current 8A 16A 20A 28A 40A 50A
Blower Cooling       * * *
DC Power supply 60-275 (206)
Output Voltage 95% VCC Supply